1 / 4
Hose clamp (for silicone hoses in particular @ 10mm ØOD)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hoseclamp I needed for a project. It's designed to clamp the outside of the hose so that the internal…
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 626
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (24)Powiązane
This is a hoseclamp I needed for a project. It's designed to clamp the outside of the hose so that the internal diameter is not impinged (much). Clamping the outside of silicone hoses is difficult, as they are very soft. It's designed for 8mm ID/10mm OD silicone hoses.
In addition to my current project, this is also part of a peristaltic pump I'm planning.
Category: Parts