Everything Presence One - Reverse Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 'stick on the back of something' mount for the Everything Presence One case from the official case desiger.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 212
- Wydruki
- 2
- Wyświetlenia
- 1859
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple ‘reverse’ mount designed to work with the official Everything Presence One case.
Allows for an alternative mounting method - i.e. being stuck on the back of things such as monitors (the reason I designed it), bookshelves, kitchen appliances, whatever.
Mounting area is 25mm wide so can be used with double sided foam style tape or Command Strips etc.
I am the designer of the official EP1 case.
You can check out my range of tablet wall mounts by following this this link.
These are also available to purchase pre-printed.
Web site (UK shipping only): https://the3droom.co.uk
eBay (Global shipping): The 3D Room on eBay