iPad 10 gen (2022) Wall mount bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pair of brackets and connection extension to mount an iPad to the wall. Made specifically for the iPad, not air or pro
- Ocena
- 4 / 5
- Polubienia
- 23
- Pobrania
- 281
- Wydruki
- 0
- Wyświetlenia
- 2979
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
A pair of brackets and an extension bar to mount an iPad to the wall. Its for the 10th gen released in 2022.
The iPad Pro, iPad Air, and iPad mini all have slightly different dimensions. So to make this ork for them one would need to adjust the thickness of the middle of the brackets, smaller in those cased and the length of the extension. And for the mini, the brackets would need to be shorter. The Apple store Tech Specs has the necessary dimensions to workout the change.
The thickness of these is 5mm for the structure, and the brackets that go behind the iPad is 12.5 mm wide. The space where the iPad is held is 7.25 mm tall, and 7.2 mm wide.
To assemble, insert the extensions into the dovetailed slots on each extension. There's a notch on the dovetails on the extension. This is meant to face up, and the extension should fit flush, if inserted correctly, flip over if not.
The screw holes are 3mm in diameter, meant for 1.65 mm countersunk flat head M3 drywall screws, and wall anchors.