1 / 8
Bottle Cap Opener v.2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After lots of tests, I ended up with this design. It's just another "Bottle Cap Opener".
- Ocena
- 4,75 / 5
- Polubienia
- 114
- Pobrania
- 910
- Wydruki
- 30
- Wyświetlenia
- 2712
- Oceny
- 32
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 30) (Komentarze: 63)Remiksy (1)Kolekcje (188)Powiązane
After lots of tests, I ended up with this design.
It's just another "Bottle Cap Opener".
but:
- Higher to accept different caps diameter.
- Big enough to help unscrew caps but not too much. (Let's save filament).
- Ergonomic Design to fit Thumb-Index grip.
- Large top hole to let expel caps.
- Little hole to tie it up to something and never loses it.
- "Direction of Usage" top sign to help those who just can’t get into it. (my wife)
Print instructions
Prints without supports
0.4 nozzle
0.15 layer size
15% infill
I've printed in PLA and it works perfectly.
PETG or ABS are surely more durable.
[19.09.2022 Edit]
As seen in many comments, in some world regions (Germany for instance) a scaled version works well, then I directly added a 110% scaled STL as suggested by sherlocked.
let me know in the comments your region and which version works for your bottle caps.