30cal Ammo Box PSU Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
30Cal Ammo Box PSU mount This mount fits snug into a standard 30cal ammo box and is designed to fit a Meanwell LRS 350…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 154
- Wydruki
- 0
- Wyświetlenia
- 756
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
30Cal Ammo Box PSU mount
This mount fits snug into a standard 30cal ammo box and is designed to fit a Meanwell LRS 350 PSU. The PSU mount is offset to give about 2.1" of space for a controller mount and controller.
There is a M4 screw hole on the bottom to secure the PSU to the mount.
There is a M4 screw hole on the top side to secure the mount to the ammo can.
Prints very easy, best to print on the side.
Can be made with PLA or PETg. Would suggest PETg if you are in a warm climate.
Category: Electronics