1 / 5
Ender 3 S1 heat bed cable 90° strain relief & deflector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I would obviously recommend using a high temp plastic, I used ABS.
- Ocena
- 4,333 / 5
- Polubienia
- 42
- Pobrania
- 331
- Wydruki
- 6
- Wyświetlenia
- 3430
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 6) (Komentarze: 9)Remiksy (3)Kolekcje (86)Powiązane
3/2023 Updated both main parts for fit and easier installation
I would obviously recommend using a high temp plastic, I used ABS.
The deflector shield thing is whatever.. maybe kinda flimsy but it works. You just need something to keep the cable from getting snagged on the y axis drive.
Edit: Actually don't bother with the deflector unless you need a dust cover lol. use this model by Fred Maranhao instead: https://www.printables.com/model/421545-ender-3-s1-bed-cable-relief
Category: 3D Printer Parts
