Christmas Reindeer - Prancer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix improves on a few areas that made printing the original design very difficult. feet have been made flat on…
- Ocena
- 5 / 5
- Polubienia
- 343
- Pobrania
- 1698
- Wydruki
- 5
- Wyświetlenia
- 5573
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This remix improves on a few areas that made printing the original design very difficult.
- feet have been made flat on the bottom and even, so deer stands in a more stable manner
- custom supports have been made more substantial to provide better support -- especially to the lifted front leg
For the other reindeer with all four feet on the ground, see yeg3d's design: https://www.thingiverse.com/thing:571949
DO NOT TWIST OFF SUPPORTS. Use a sharp Xacto knife or Dremel to remove the supports. Twisting off the supports will likely result in breakage of this very delicate model.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
20%
Filament: Creality PLA White
Notes:
- I printed this at 145mm in height. I used 0.16mm layer height and a 0.4mm nozzle. I used Creality's white PLA filament. **DO NOT TWIST OFF SUPPORTS. Use a sharp Xacto knife or Dremel to remove the supports. Twisting off the supports will likely result in breakage of this very delicate model.**
Category: Decor