1 / 3
Fun Maze Container
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I know there are a lot of maze prints out there. I just wanted to see if I could make one from scratch on Fusion 360.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 546
- Wydruki
- 7
- Wyświetlenia
- 1735
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 10)Remiksy (0)Kolekcje (81)Powiązane
Simple to print maze. No special needs for the print. Just print with the large area bases on the print bed. You could add a large brim if you have issues with large prints.
To check the tolerances, you could print a few minutes of the cover upside down to see if the ring fit is too tight. If you need a little more space you could increase the X,Y a 1% or 2%.
After the print is done, you might need to smooth down the locking pin on the Maze for a snug fit.