Prusa MK3s Sunlu S2 drier mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update to Sunlu S2 driers and new bracket to mount to Mk3s
- Ocena
- 4,889 / 5
- Polubienia
- 68
- Pobrania
- 350
- Wydruki
- 8
- Wyświetlenia
- 2628
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SunluS2 mount for the Prusa MK3s.
Same style as previous Sunlu mount
Both halves printed in 0.3mm Draft mode with 40% grid infill with 2 perimeters PETG
parts required to join too halves
2x M3x16 cap head bolts
2x m3 square nuts
Additionally, mount can be attached to frame if you want to drill 2 x M3 holes at 30mm centres too centre of rail. haven't found need to do this on this design.
2 x m3 x12 csk cap head bolts
2x m3 square nuts
created Additional filament guide due to the S2 not having any front exit for the filament
Parts for the filament guide
1x M10 pass thru fitting
2x m3x10 cap heads
2x m3 nuts.
found the ideal entry point to be just at the end of the mold slots. my dilling wasn't perfect as you see in last photo