Press On Star Knob For 5mm Socket Cap Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can purchase press on knobs for socket cap screws but they don't have a very good grip. I needed one for 5mm…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
You can purchase press on knobs for socket cap screws but they don't have a very good grip. I needed one for 5mm socket cap screws that I could apply more torque with. They have star shaped knobs that are much better in that regard, but not in a press on style. So I combined the press on style with the star shape and now you can print your own.
Print Settings
Printer:
VCORE 3.1 500
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
75% or higher
Filament:
Any ABS, ASA, PETG
Any
Notes:
When printing this use 4 perimeters and use a structural infill like triangles otherwise when you press in the screw it could break the print
Category: Parts