Skyzone 04x Sharkbyte Receiver Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement fan cap for the skyzone 04x goggles to mount the sharkbyte receiver.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 697
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
*Update 1/22/22* Added a stretched version of the fs_buddy design so stubby antenna can fit on the sharkbyte vrx and not interfere.
*Update 1/17/22* Added file fs_buddyfor04xwcap. This file is the fan cap, with an fs buddy attached to it. The fs buddy is used by the powerplay dvr for mounting. I also have a design for the wireless headtracker and case that mounts to the fs buddy. See this thing: https://www.thingiverse.com/thing:3476802
You'll need to print this one with plenty of supports and with the fsbuddy on end and the hinge on the cap in the max Z direction. This is so the clip of the fs buddy is strong and won't crack.
This is a replacement fan cap for the skyzone 04x goggles to mount the sharkbyte receiver.
Best to print it on it's side as I've uploaded, with the hex socket facing up. Get the best looking results like that, and good strength.
Print Settings
Printer:
custom
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
50%
Filament:
any ABS PETG PLA
Category: R/C Vehicles