1 / 5
Z3 Camera mount for Runcam3 (or 2) and Foxeer 1177 or Arrow — zdjęcie 1
1 / 5

Z3 Camera mount for Runcam3 (or 2) and Foxeer 1177 or Arrow

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a camera mount for a Runcam3 (or session) and 1177 or Arrow (or similar) cameras for the Ritewing Z3. This is…

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
140
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This is a camera mount for a Runcam3 (or session) and 1177 or Arrow (or similar) cameras for the Ritewing Z3. This is a fairly old plane but I've had the kit for years and finally got around to finish building it. So I needed a mount for it. This is a one piece mount that requires hacking off the nose of the Z3 (like my mounts for the minidrak)and gluing the mount in place.

The Runcam3 or Session is held on by a velcro strap. And the fpv cam is pressed into place and the lightly glued to hold it in place. The top hole is for an airspeed sensor. The hole is 1/8" diameter but can be drilled to any size required.

*Update 10-2-2018* Added file ..._noAsp for mount without the airspeed sensor

*Update 1-03-2020* Added file for runcam2 and 1177 per request

Category: R/C Vehicles

Tagi