Nano SkyHunter Cockpit for Nerdcam3d MK1 and MK2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lightweight cockpit you can print for the Nano Skyhunter to easily provide mounting for the Nerdcam3d MK1 or…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a lightweight cockpit you can print for the Nano Skyhunter to easily provide mounting for the Nerdcam3d MK1 or MK2 and your video transmitter. It prints in two pieces, either the mk1 file or the mk2 file and the lip file. Use CA and activator to adhere the parts together. Use 4 2mm screws to mount the camera to the print, and add CA to the threads to prevent them from coming loose, or add a locknut to the back.
The model prints best with a .42 print width and 20% infill. Use brim and supports for the cockpit. I recommend 70 degree angle and 4mm support resolution if using S3D to slice.
*Update 9-16-2016* Added rev A version of MK2, corrected hole location for screw head clearance on back of pcb. (individual camera mounting screws)
Category: R/C Vehicles