One Quarter Symmetric Spool Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed around Hatchbox filament spool. Has slot for a label. Attach with M3 screws.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Idea is not new, but wanted to recycle old filament spools. Started with a Hatchbox spool.
Includes slot for paper labels.
Use an M3 screw(s) to affix. May wish to include washer(s) between spool and container. A couple mm clearance on height of container.
To be fancy, drill a hole thru the container and spool and use QTY 2, size 4 mm DIAx2 mm thick round magnets to hold a container in place when closed.
Hole jig also provided.
Dimensions [mm]
ID: is the usable diameter for the container
h_ID : height of spool usable for the container
| Brand | OD | ID | h_ID |
| Hatchbox | 200 | 80 | 61 |
| Microcenter | 200 | 92 | 55 |
| Amazon basics | 200 | 108 | 70 |
Parametric model (TBR)