1 / 6
Gridfinity Snap Together Baseplate with Captured Magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Economical and connectable magnetic baseplates. No glue needed for magnets or connections.
- Ocena
- 4,8 / 5
- Polubienia
- 195
- Pobrania
- 1006
- Wydruki
- 5
- Wyświetlenia
- 12 124
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (27)Wydruki i komentarze (Wydruki: 5) (Komentarze: 8)Remiksy (1)Kolekcje (414)Powiązane
Zack Freedman’s original Gridfinity Base Plates
https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925
Also inspired by https://www.printables.com/model/250550-gridfinity-magnet-light-baseplate
Optimal settings:
- To install 6x2mm magnets, add a Pause in your slicer at the beginning of the layer where the magnet holes start to get covered - see picture below
- Single external perimeter of 0.8mm with 0.4-0.6mm nozzle
- Arachne Perimeter Generator if you have it. Otherwise enable Detect Thin Walls
- Infill: 1% (Infill isn't necessary but Prusa slicer doesn't bridge in some key areas if the infill is zero)
- Prusa Mini: disable the skirt to fit a 4x4 plate
- For edge pieces the protruding snaps can be removed using the cutting tools in your slicer
Each protruding snap has a built in support that needs to be removed after printing
Connecting a tile into a corner will be difficult, so connect tiles together in strings and then connect the strings together
Changes:
- Jan 3-2023 Added 5X and CAD files