Mk3 style Y belt holder for Prusa Mk2.5 / Mk2 / Mk2s [Mk42/Mk52 12v heatbeds]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edit: Don't bother with this.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 1089
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Edit: Don't bother with this. Instead use Prusa's new Mk3s 2-piece design with integrated belt tension adjustment which will work on Mk2 and above printers. See "Y-axis parts: here:
https://shop.prusa3d.com/forum/general-discussion-announcements-and-releases-f61/new-printed-parts-c1-r4-mk3s-mk2-5s-mmu2s-t27888.html?sid=c6442c7f90151ff3df9a1e820c2ae0a3
Wr125x's Y-belt holder was a little too tight for one of my Mk52 12v heatbeds, So I elongated the bolt hole closest to the front of the printer by ~1.5mm while keeping the other hole circular. This model ought to install on all generations of the Mk42 and Mk52 12v heatbeds.
Advantages over Mk2/Mk2s design:
consistent with Mk3 design which is what Prusa determined is more reliable in their lab
quicker install/assembly
more stable since one hole is circular rather than elongated
Disadvantages over Mk2/Mk2s design:cannot adjust end stop location since holder cannot slide with respect to heat bed