Parabolic Lampshade for a Small Gooseneck Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parabolic lampshade for a small gooseneck lamp, hole at base is 3.6 cm, 10 cm height, 15 cm maximum width.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I have a small desktop lamp that took too many tumbles to the floor, and the original plastic lampshade cracked and was shedding broken pieces This is a straightforward replacement that matches the original dimensions.
There is no brand name on the lamp, and I couldn't even tell you where and when I obtained it. The only marking is a sticker on the underside -- see the attached photo if it might help. Here are the dimensions of the lampshade, if it's going to be of use to anyone else:
Inner diameter (where the lampshade attaches to the lamp): 3.6 cm
Wall thickness: 2 mm
Height: 10 cm
Maximum diameter: 15 cm
Print with the narrow, flat end on the build plate. No supports are needed. I used PETG, but no reason PLA wouldn't work as well.