1 / 18
"Oops, i've accidentally overdesigned my" RPi3 housing for my Prusa Mk3s
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've wanted something more fancy than the available RPi housings and therefore completely overdesigned this Housing
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (8)Powiązane
I've completely overdesigned this model to:
- make it easier removable from the base
- I wanted to have a sturdy design without backless, therefor made the screwless design in a screwfull design
- To have female pins for the Pi to minimize damage
- to have additional GPIO and power pins on the back of my RPI for better routing of wires
Assumes printing by MMU2s, but the model can be made as a single color. 3MF files includes for convience.
Details will follow in case of significant interest.
Current model assumed heat sink inserts. In case of interest I will change the design to directly screw in the part.