1 / 4
Singer 185k Hand Crank Adapter — zdjęcie 1
1 / 4

Singer 185k Hand Crank Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These parts bolt on to the existing sewing machine to allow use of a Singer (or reproduction) hand crank.

Ocena
0 / 5
Polubienia
8
Pobrania
41
Wydruki
0
Wyświetlenia
742
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

I printed PLA with 50 percent infill. The screw holes are sized for #6 screws. The parts fit tightly and may require a little sanding to get a perfect fit on the flywheel. Reproduction hand cranks can be found at the usual places for about $20. 

Edit: I revised the parts.  The Final version has more material around the outside diameter and an enlarged hole for the crank handle. I printed the final version in grey petg.

Edit: Doni Hardy sent me an upgrade that helps the crank arm fit without trimming the adapter hole.  It is a spacer to move the crank out slightly from the sewing machine body.