Maracca Noisy Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two piece maracca noisemaker
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print this maracca and make some noise!
The handle and bulb are printed separately so that the inside can be filled with a noise making medium. Print, Fill, Glue, Enjoy!
No supports needed. Orient the opening of the bulb down and place the flat end of the handle down.
I used metal BB's and they produced a nice rattle. After filling, I used a two part epoxy to seal it closed. Print with PLA since it is hard, which produces more noise than softer filaments.
WARNING! The contents of the rattle can present a choking hazard if the two parts separate. Use at your own risk. This is not a baby toy.
Material: PLA
Layers: 0.2mm
Supports: None
Infill: 15%