PRUSAMENT Soda Bottle Bird Feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its that time of the year, lots of birds around my home & work so I created this bird feeder that utilizes the…
- Ocena
- 5 / 5
- Polubienia
- 192
- Pobrania
- 792
- Wydruki
- 19
- Wyświetlenia
- 7608
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Its that time of the year, lots of birds around my home & work so I created this bird feeder that utilizes the PRUSAMENT spool half as a perch for the birds. The threads are PCO1881 specification, so it should fit most soda bottle types. The threads on these models have built-in tolerances for most 3D printers.
Print instructions
Print Settings:
Nozzle: 0.4
Perimeters: 2
Layer Height: 0.2
Supports: No
Infill: 15-20%
Part Needed:
1 x PRUSAMENT_Bird_Feeder_Base.stl
1 x PRUSAMENT_Bird_Feeder_Locking_Nut.stl
1 x PRUSAMENT_Bird_Feeder_Hook_Split.stl
Optional: PRUSAMENT_Bird_Feeder_Hook_Full.stl
Assembly Instructions:
Step 1: Glue the two halves together of PRUSAMENT_Bird_Feeder_Hook_Split model.
Step 2: Add glue the hook to the top of the bottle. I used 3D Gloop.
Step 3: Dissemble the PRUSAMENT spool, remove the cardboard insert and separate the halves.
Step 4: PRUSAMENT_Bird_Feeder_Base has a keyed notch for the model to align with the spool.
Step 5: Add the PRUSAMENT_Bird_Feeder_Locking_Nut to secure the base to the spool so birdseed will not fall through.
Step 6: Add birdseed to the soda bottle and thread into the model. Assemble upside-down and turn upright and let the birdseed fill the base.