1 / 3
Hotwheels Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a nice case for Hotwheels they can be stacked
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 290
- Wydruki
- 3
- Wyświetlenia
- 2046
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 6)Remiksy (0)Kolekcje (52)Powiązane
It has not been printed yet.
This is inspired by https://www.thingiverse.com/thing:4628745/files but is not a remix
I made this inspired version in onshape
The grooves in the picture are because of the infill and my filament is transparent.
1/6/24 I made a v2 version with larger connectors. There is also a new no grooves version. V2 should fit with the original if you put it at the top. I left V1 in the files if you want it.