Ball / Handle Molex Connector Pin Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a handle for a Chinese Molex connector pin extractor like this https://images-na.ssl-images-…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a handle for a Chinese Molex connector pin extractor like this https://images-na.ssl-images-amazon.com/images/I/210WUgyYXtL._AC_UL130_.jpg because the pins were being stubborn (the end of the tool was digging into the palm of my hand and being chrome plated it was hard to grip). I designed and printed this and voila it worked. Thought I would share.
Print Settings
Printer:
Alfawise U20
Rafts:
No
Supports:
No
Resolution:
.15 layer height
Infill:
15% Gyroid
Filament:
Generic PLA
Notes:
I would suggest a brim for bed adhesion. Print with the small opening down.
Clean out the hole facing down with a 3.2mm drill after printing.
Category: Hand Tools