Power Panel Mounting Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting plate for the Powerwerx 4-way Power Panel
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
A mounting system for the Powerwerx Four Hole Square Panel Mounting Plate
https://powerwerx.com/four-hole-square-panel-mounting-plate
For my purposes, the brim around this mounting panel just wouldn't be sufficient for a lean mount. There's just not enough space between the screw holes and the edge.
This mounting systems lets you mount the panel in a larger, rectangular hole, and the whole thing is held in place by the clamping pressure of the screws holding the whole thing together.
I've printed the whole thing in PETG, but I've not yet installed it. I will add new photos when I do.
I've included a BLANK front panel, as well as the one with “12V 40A” engraved.
NOTE: The dimensional diagram from Powerwerx was NOT ACCURATE for me. The spacing of the screw holes was a bit different.