1 / 4
Poop Chute Large Magnetic for Bambu Lab X1 Carbon — zdjęcie 1
1 / 4

Poop Chute Large Magnetic for Bambu Lab X1 Carbon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a poop chute for the Bambu Lab X1 Carbon. This is a larger size than the previous version with two magnetics

Ocena
4,842 / 5
Polubienia
298
Pobrania
3873
Wydruki
25
Wyświetlenia
19 263
Oceny
19

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

See the update below…

This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer.  This is a larger sized container than my other design.

The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick).  The mounting hole for the magnets are cut oversized (0.51 diameter) for an easy fit.  Might need to super glue the magnets in place.

The cutaway o n the size serves two functions.  It gives you a recessed handle to grip the poop chute when taking it off.  The angled top of the cutaway helps direct the waste filament across the chute.  Helps to keep the filament from bunching up directly beneath.

 

Filament - I used PLA+ or PLA Carbon Fiber

Support - Yes; Hybrid, Auto

Layer - 0.2mm

Infill - 15%

3mf file using Bambu Lab Studio (slicer)

 

UPDATE:

The design was updated to accommodate the feet added to the X1, X1C, P1P, and P1S.

The new design is poop_shoot_L_magnetic_V2

 

Tagi