Soul plate, alternative, USD 7 Agressive Skate (Roman Abrate version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an alternative soul plate for the above mentioned agressive skate. Size EU 43/44. I use it when I skate with a…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 646
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is an alternative soul plate for the above mentioned agressive skate. Size EU 43/44. I use it when I skate with a tri 110mm setup, because they are not so bulky and safe about 100 g of weight per boot. I tested it. Nice!
The holes of the heel part don't fit perfectly but well enough. I should say, I do not know, if it fits as well on the regular USD 7, because the Abrate version has some leather stuff on top of the plastic of the boot.
I used ABS and printed with the bed at 110 °C and a 10 mm brim. Worked perfectly with my enclosed chamber. Make sure to use support for the screw holes.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
100%
Filament: dunno ABS Black
Notes:
I sanded them roughly after the print.
Category: 3D Printer Parts