1/35 scale HESCO Barrier for diorama
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those unfamiliar the HESCO barrier is a canvas and steel mesh box for flood control and blast protection
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 154
- Wydruki
- 0
- Wyświetlenia
- 1492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
For those unfamiliar the HESCO barrier is a canvas and steel mesh box that gets filled with sand/gravel which is used for either flood control or blast protection in military installations replacing the traditional sandbag. The key difference is these are filled by machine (front loaders, etc) which means a huge wall can be laid in minutes vs many hours of hand filled sandbags. To make diorama scale ones we need to print this model along with a few simple supplies (I am assuming you have the paints you need (they get painted a dull greenish/brown)
Supplies:
- 2” (50mm) fiber wall board tape
- 1.25 (32mm) regular beige masking tape
- Some small amount of CA glue for repairs
- Beige or brown sanded grout (powdered) to match the earth in your diorama (or fine sand and scenic glue)
there is a PDF with step by step directions along with a STEP file for those that want to modify it. Note while you could model the grid into the plastic it is so simple and cheap to do this as I did it's not worth it. Also the fact that the tape doesn't quite adhere perfectly makes it actually more real as the real barriers have some slack due to the way the dirt fills them.