Aquarium Siphon Cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aquarium Siphon Cage.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 1044
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.
End cage for an aquarium siphon to avoid accidentally sucking up your fish for a warp speed ride up the tube. Just slip it on for water changes and slip it off for gravel vacuuming. This model was designed with a 0.1mm tolerance to be a firm fit, if your printer isn't printing dimensionally accurate you may have to scale it up or down in your slicer to compensate for your printers inaccuracy.
NB: If your printed model turns out to be a little too large for your tube, then you can use a little bit of tape to make up the circumference to make it fit.
Size is 25.4mm or 1" in the old money.
Happy Printing