GyverLamp enclosure for LeroyMerlin glass cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project of GyverLamp2 (https://github.com/AlexGyver/GyverLamp2/blob/main/docs/GyverLamp2_doc.pdf) Enclosure
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This project of GyverLamp2 (https://github.com/AlexGyver/GyverLamp2/blob/main/docs/GyverLamp2_doc.pdf)
Enclosure for LeroyMerlin 20x10 glass cover, that using a:
16*16 ws2812b LED matrix (like here: https://aliexpress.ru/item/4001298468697.html)
and a MAX9814 microphone module (like here: https://aliexpress.ru/item/32660519341.html)
still using touch button TTP223 (https://aliexpress.ru/item/32807399108.html)
The universal PCB (wiring is recommended on a breadboard 3x7 (like a https://a.aliexpress.com/_ACRX3f), with cutting the board to 65mm long or smaller) is mounted into the pedestal of the case by inserting it sideways into the groove and fixing with nylon cable ties 2.5x200, for which there are design holes under the groove. The MAX9814 microphone module is designed with a holder slot on the side of the main electronics PCB holder).
To fix stand to the pedestal, use countersunk m3x8 screws and welded-in captive nuts with m3 size: https://aliexpress.ru/item/1005001407970757.html
Use this: https://aliexpress.ru/item/4000098668516.html DC power connector for installation in the pedestal of the case.
Print Settings
Printer:
FlyingBear Ghost5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
YaSdelal'ъ PET-G
White
Notes:
Use supports only for the Postament.stl file, and only from the build plate. Other files without(!) supports, otherwise the threaded connections will not work.
Category: DIY
