Seat tube cable manager for e-bike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small cable manager that can be mounted on the seat tube. It bolts into the drinksholder bolts.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is my attempt to cable manage my e-bike build.
The adapter screws into the seat tubing and there are 6 mount points for small cableties. When you are done a lid slides into place and covers up the cables.
The model can be printed in all common materials, I used ASA for it's uv resistance.
I've included the fusion 360 file so that parameters may be adapted for your bike.
If your bike has:
- 41mm diameter seattube
- 68mm hole spacing for drinks holder
Then the model will fit as is. The tolerances are also pretty loose so it will probably fit many regular bikes with little modification.
The important parameters can be changed under “user parameters” in Fusion 360.