Gridfinity 1x2 D Battery Holder, no lip, no magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds two D batteries, 1x2 Gridfinity blocks, no lip around the top, no magnet holes on the bottom
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 140
- Wydruki
- 3
- Wyświetlenia
- 532
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of the battery storage tray by BenBreaksThings to hold two D batteries in ZackFreedman's Gridfinity organization system.
Since these can't be stacked with batteries in them, I remixed the original to remove the lip from the top to reduce print time and material, and resolved a warning regarding open edges. There are no magnet holes on the underside of the model – if you do want them, it should be pretty easy to do with cylinders under the “add negative volume” function in PrusaSlicer.
If you download a gcode file, make sure you choose the right one for your printer – one is for use with a 0.4mm nozzle, the other is for use with a 0.6mm nozzle.