Artillery Sidewinder Remote Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This moves the power switch and adds a switch to flash Marlin to the side next to the Micro SD & USB ports.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 728
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this to relocate the power switch to make it easier to get to. I also added a switch so I can flash Marlin without having to open up the bottom and disconnecting the TFT screen. There are two versions. One has switch labels designed in. I'm not sure how well it will work out for you. And I have one that is blank so you can add a stick on label or something. It is designed to fit a 10 amp switch that fits into a 16mm x 19mm cut out. You will need 4 M3 x 8mm screws and 4 M3 brass heat set inserts. There is NO cutting of the printer base required. It uses existing slots on the side for mounting and wires.