Milwaukee Divided Big Packout Box. Now added new boxes.

  I present to you: MILWAUKEE DIVIDED BIG PACKOUT BOX.

 Had 2 make this with “original measures”. I think I nailed it x) Still stuff missing from sides what are in original but I don't need those. Tried this first: https://www.printables.com/model/210491-qbrick-compartment/files 

 Cover photo = Original at left and my model at right.

 You can see in pic where the lid is closed and boxes are inside ( Left one “Qbrick” ) and right one is my creation. I had to enlarge Qbrick to get the size that I wanted. It came out nicely but it also used much filament.

 So I wanted to make lightweight, durable and filament friendly. With my settings I used 182g filament for this with supports. The first one in link ( qbrick_2.stl ) I printed took with same settings 267g.

 Box measures: L= 204mm W= 100.5mm H= 97mm

 Box has supports under the “ledge”.  So that “ledge” won't bend.

NEW INFO FOR NEW BOXES.

 Used tree support to both and worked like a charm.

 You can put these anywhere on packout box and these will fit with lid closed. But if you put box where those little boxes are then there will be a gap in center but things have to be very small to pass through the other side. If majority of people want somekinda temporary addon to center then I'll try to make some kinda wall there that you can put it on and take it off if you don't need.

I used these settings in Cura

- Supports all

- Infill 10%

- Support pattern Concentric (This was almost easy removal but the support under the “ledge” and between boxes own supports I had to use small srewdriver and twist to get it loose.)

- Support density: 10%

- 0.2 Layer height

- Speed 50 to 80. Went 50

- 3 walls

- Build plate adhesion: No

• Tree support