Bow Tie with Infill pattern magnetic knot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the Idea that you easily can switch the patterns of this Bow Tie by adjusting the Infill Pattern. UPDATED
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A Bow Tie that you can easily adapt by chancing the infill parameters of the inner Part.
The .3mf file is ready to go prepared and a single pair takes, depending on the options, less than two hours.
The prepared G-Code contains three pairs,
one pair with the Hilbert curve pattern,
one pair with the Beehive pattern and
one pair with the Gyroid pattern.
UPDATE: I made a version with a flat top Surface so the Infill looks better.
The band should not be wider than 15mm and could be adapted via some snaps or you can print the three bar slide by NormanRiver or you can download and try the attach system by chavant_fou_3d it should work if you increase the size to about 125%.