Rebreather tank carrying handle and base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Equipment that you can use to carry or store 3 liter tanks, 100mm wide.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 1471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Equipment that you can use to carry or store 3 liter tanks, 100mm wide. Same size what JJ ships with.
Two parts design. If you only use it for storage, print just the base. If you use it for carrying, print both parts.
Attach the handle to the base by using 1,5mm - 2mm line (cave line). Measure the correct distance by using tanks. Handle should be almost at the neck of the tank.
Then attach a bungee loop on the handle as well. When carrying, loop the bungee around a tank valve to keep it up. This also prevents tanks from rolling, while stored sideways on a car or a boat.
I have printed this using PETG, 0.3mm layer height, 20% cubic infill and minimum of 3 perimeters.