esp32 box for wled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
box for esp32. for use with WLED. Teyleten Robot ESP32-S3-DevKitC-1 (slots in).…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 3412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
box for esp32. for use with WLED.
- Teyleten Robot ESP32-S3-DevKitC-1 (slots in). https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details
- ESP-WROOM-32 ESP32 ESP-32S (screw in). https://www.amazon.com/ESP-WROOM-32-Development-Microcontroller-Integrated-Compatible/dp/B08D5ZD528/ref=sr_1_4?crid=2RENUZHMWDQ0T&keywords=3%2Bpieces%2Besp32%2Bwroom&sprefix=%2Caps%2C105&sr=8-4&th=1 (either choice of usb will work)
note: ESP32-S3 is in beta for WLED and needs manual compiling as there are no official bin files released for this board yet.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament: esun PLA+ white Post-Printing =============
screws
M3x(5 to 10) holds lid.
M2x(2 to 3) holds ESP-WROOM-32 (if using that board)
power jack is 5.5mmx2.1mm with a cutout diameter of 7mm. although I used an 8mm hole and it was snug. https://www.amazon.com/dp/B01N8VV78D/ref=vp_d_ac_sub_sp_pd?_encoding=UTF8
Category: Electronics