Galaxy Tab A8 Wall Mount

I have a Prusa MINI (18x18cm printing bed), I have a Galaxy Tab A8, and I wanted to mount the tablet on the wall for a HomeAssistant (kiosk) control panel. So I did this frame which can be print also on PrusaMINI 3D printer. 

Some key details:

• thin
• allows hiding the charging cable (I am using one like in the attached photo)
• assembling solution prevents accidental disassembling
• minimum supports
• No glue, no visible screws
• Can be assembled and disassembled without damaging it
• Speakers, microphones, camera and power button are accessible through dedicated holes

Printing suggestions:

• PETG (is less brittle)
• min. 0.2mm quality 
• base_left, base_right:
  • I used 3 Vertical Shell Perimeters, but not necessary needed
  • I used 25% infill, but not neccessarry needed
  • If needed, reduce Skirt distance from object on Prusa MINI
• cover_left, cover_right:
  • Supports, style=Snug and “First Layer Expanssion” reduced to 0.5mm on prusa MINI to have space on the bed
  • No skirt on PrusaMINI (0 mm) bacause of no space
  • I used 3 perimeters and 25% infill, but not necessary needed
• cover_top, cover_bottom
  • can be printed together
  • I used 4 perimeters only above the flat area, for the small connecting parts, but not necessary needed, I just wanted to avoid braking those connecting parts

Assembling:

• Check video: 

• Screws dimensions:

I will add photos after mounting it on the wall.