Airport Express Wall Mount - ReMix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated the original artist design to allow the sides to flex where the retention ears are; added slots. Also took the…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Updated the original artist design to allow the sides to flex where the retention ears are; added slots. Also took the counter sunk holes meant for flat head screws and made them pockets for pan head screws since most of our drywall mounting kits include pan head screws.
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament:
Inland PETg
Notes:
Since this is indoors and not a lot of heat from the Airport Express you could use PLA. ABS should work fine also.
Category: Computer