1 / 4
Print-In-Place Fidget Spinner with Ball Bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Takes about an hour and a half to print on 60mm/sec. Once done loosen the ball bearings and your good to go!
- Ocena
- 3,2 / 5
- Polubienia
- 27
- Pobrania
- 268
- Wydruki
- 2
- Wyświetlenia
- 1261
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (31)Powiązane
Support: No
Raft: No
Infill: 20%
You may or may not have to loosen the bearings depending on the quality of your printer.
You also may need to lubricate the bearings.