Voronoi Filament Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This large voronoi spool holder works with both Prusament 1KG spools and ColorFabb 750 gram spools.
- Ocena
- 4,857 / 5
- Polubienia
- 239
- Pobrania
- 1666
- Wydruki
- 19
- Wyświetlenia
- 8069
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
This large voronoi spool holder works with both Prusament 1KG spools and ColorFabb 750 gram spools (these are the spools I had to test). Other similar spools should work just fine too!
You'll need the following (3D-printed) parts:
- Base of the holder (1x)
- Rollers (2x)
- Pins (4x)
- 608ZZ bearings (4x)
Assembly is quite simple. First you insert the four bearings into the two rollers. You then align the rollers in the base (one by one). Whilst holding the roller in position, press the pins through the base and into the rollers. Take a look at the cross section view to better understand what the end result should be. You shouldn't need any glue, as the pins have a press/interference/friction fit with the bearings. The same goes for the bearings and the rollers.
If you've used this holder with any spool other than the ones I've mentioned, please drop a comment so other people know what spools work :)
Support
If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link: https://s.click.aliexpress.com/e/_oFT8Gq6
Whenever you buy something through this link, I get a small kickback without costs for you ;)
Thanks for your support!
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.15mm - 0.20mm
Infill: 15%
Filament: ColorFabb & Prusament PLA/PHA & PLA Dutch Orange & Galaxy Black