1 / 4
Mold Rack for Artisan Keycap Mold — zdjęcie 1
1 / 4

Mold Rack for Artisan Keycap Mold

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An organizer for artisan keycap mold

Ocena
0 / 5
Polubienia
19
Pobrania
89
Wydruki
0
Wyświetlenia
1546
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an organizer for Artisan keycap mold.

You can organize your mold within this rack or put the whole thing in pressure pot during resin casting.

If you want specific size, feel free to request me

or visit my site here.

 

Recommended Setting:

Material : PLA

Nozzle Size : 0.4 or 0.6

Layer Height : between 25% to 75% of Nozzle size

Layer Width : Same as Nozzle size

Infill : 15% or above

 

 

Tagi