1 / 4
Solder Fume Extractor — zdjęcie 1
1 / 4

Solder Fume Extractor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A DIY solder fume extractor uses a 120mm PC fan and activated charcoal filter. It is powered via micro-USB.

Ocena
4 / 5
Polubienia
40
Pobrania
130
Wydruki
2
Wyświetlenia
2622
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

A simple solder fume extractor

Using an activated charcoal filter to absorb solder smoke.

My cost to build this was $13.10 (USD), including filament, electronics, hardware, and all components.

Powered via micro-USB so it can be powered via a computer, USB wall plug or power bank.

The fan and filter slide nicely into the print and fit tightly in place without any bolts/fixings.

I have also included an STL where the main ‘box’ and top piece (which holds the fan and filter) is printable in one piece (may need supports). This also does not have a place for the USB breakout board to sit in case you find something with different dimensions.

Parts List:

Electronics:

I haven't included how to do the electronics, however, it is pretty simple.

If you have any questions or would like something changed, just reach out :-)

Tagi