Keybord Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for a self-made keyboard [meishi2].
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cover for a self-made keyboard.
It protects the exposed PCB from dust and short-circuiting due to contact with something.
It is not waterproof due to its sliding structure.
This cover fits the following products.
meishi2 kit
SKU: A0100M2-01-1
https://shop.yushakobo.jp/products/834
https://biacco42.hatenablog.com/entry/2019/08/10/185624
About Printing
It is recommended to print with the opening facing up and brimmed since it is long and narrow.
PLA or PETG is the appropriate material.
Layer pitch is 0.2mm
Infill is 0%.
I set a snag for the opening.
Printing time is about 1.5 hours.