Decimator Type 1 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
At work we use a number of the Decimator.com Video adapters. Regular practice is to use Velcro to mount them on a wall…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 205
- Wydruki
- 0
- Wyświetlenia
- 1008
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
At work we use a number of the Decimator.com Video adapters. Regular practice is to use Velcro to mount them on a wall or in a case. But people with 3D printers can do better!
This will fit a few models with the same case...
MD-Cross, Decimator-QUAD, MD-HX, DMON-QUAD should all fit.
The model requires a little bit of flex for the Box to slide in, I used Matter Hacker Pro-Nylon and it works great for this.
I Printed this flat, no supports needed.
Counter sunk holes for using wood screws to mount.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
.15 layers with a .4mm nozzle
Infill:
20
Filament: Matter Hackers Pro NYLON Orange
Notes:
A little warping should effect operation.
Category: Parts