Button Pusher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a finished concept that I doubt many will need but maybe it will inspire some problem solving for you? I…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a finished concept that I doubt many will need but maybe it will inspire some problem solving for you?
I needed to push a button on the back of a network rack once every day. It is not super easy to get behind the rack...so the button pusher was born.
It uses a 36" flex cable pickup tool as the driving cable.
https://www.amazon.com/gp/product/B006ZEOXJY/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Parts were mounted using 3M VHB tape.
A nyloc nut, 2 washers and a bolt form the pivot. The flex cable is hot melt glued to the holding bracket.
Not very complicated but the concept was sound the geometry of the pusher was key.
I use it every day and it works well.
Category: DIY