1 / 3
2.25" threaded hose adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The cyclone works great, my shop is already much cleaner and my vacuum is no longer getting clogged! Thanks! This is a…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
The cyclone works great, my shop is already much cleaner and my vacuum is no longer getting clogged! Thanks!
This is a 2.25" screw in hose adapter. I gave it a little extra flange for support on the outside and it's chamfered on inside where it meets the threaded portion to help it print without supports and direct air from the adapter into the cyclone a little better.
Print Settings
Printer:
FFCP
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
33%
Filament:
Whatever was leftover from the last print PLAPink
Category: DIY