3D Print in progress sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've been doing some public 3D printing events and I found myself needing a sign to show when the 3D printer was…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 326
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
I've been doing some public 3D printing events and I found myself needing a sign to show when the 3D printer was running and the lame paper sign wasn't cutting it. We need a 3D printed sign!
I searched thingy and found this thing https://www.thingiverse.com/thing:1761855 by ideawizard. It was close, but not quite what I was looking for.
So here's my take on a 3D print in progress sign!
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.27
Infill:
15
Filament: Any PLA Any
Notes:
Prints easy, if you want a dual color sign swap filaments after 5mm when the lower block is complete. I used S3D and created two print processes to get the infill to show on the bottom portion.
Category: Signs & Logos