1 1/4" Drain Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bathroom sink drain cover
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I was tired of cleaning the trap in a sink with no drain plug. All sorts of things get dropped in by accident, not to mention the multitude of hairs. This plug went through 3 revisions to allow decent drainage, while keeping the majority of debris from being sucked into the void. My drain was 1 ¼" with a taper after the opening, the tightest tolerance is not necessary here, so there is a slight amount of room to spare. The actual insert to the drain measures 30mm.
Also included is the gcode which I used, It is set up for overture white PETG, and has reasonably removable supports.
I do recommend printing this PETG for resilience and cleaning sake, and printing it upside down to minimized supports.
Happy Printing