1 / 3
Long Caliper Jaws for Harbor Freight 40" Rule Fusion 360 — zdjęcie 1
1 / 3

Long Caliper Jaws for Harbor Freight 40" Rule Fusion 360

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

100mm caliper jaws to fit the Harbor Freight 40" aluminum rule. F360 and STEP files added 3/1/23.

Ocena
0 / 5
Polubienia
21
Pobrania
104
Wydruki
0
Wyświetlenia
489
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

These adjustable jaws were designed specifically for the Harbor Freight 40" rule, but may work with other similar rulers. When attaching the fixed end, make sure it is fully seated and the edge lines up with the 20mm mark. Fusion 360 and STEP files included.  The F360 file includes user parameters to adjust the model to fit ANY size ruler. 

The printed knobs and jaws have modeled 3mm internal threads which you may need to chase with a tap. Use 3mm x 10mm socket head cap screws and screw the knob on fully. It should be tight enough as is, but if it becomes loose, a dab of super glue should hold it.

DO NOT tighten the screws too tightly on the ruler as it could damage the edge and make the moveable jaw hard to adjust.

 

Tagi