Tiny CNC Electronics Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a custom electronics box for Ivan Miranda's Tiny CNC Mk. II design.
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 2109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I designed a custom electronics box for Ivan Miranda's Tiny CNC Mk. II design. The box features mounting holes for a 12v 10A power supply, an Arduino Uno with a CNC shield, a 12v panel mount connector, an emergency stop button and a power inlet port.
It is designed to mount directly onto the frame of the Tiny CNC, but could be altered for different sized holes, or not mounted at all.
I have uploaded two different sets for people with larger format printers, so you can print them together. One set will fit on a 200x200mm print surface and the other will fit on a 300x300mm surface.
Check out the full build video here for more information about the project!